1. Turn off the computer and unplug the power cord.

2. Remove the computer cover and the adapter slot cover from a slot that matches your adapter.

3. Firmly place the adapter edge connector into the slot until it is fully inserted. Secure the bracket to the chassis.

4. For the Intel® QuickAssist Adapter 8920DCC only, connect the external power connector—a six-position connector derived from the PCI Express* x16 Graphics 150W-ATX power connector definition.

5. Replace the computer cover and plug in the power cord.

Note: Some Intel adapters utilize the PCI Express* bus. You may utilize a slot that is longer than your adapter’s connector with no harm but do not attempt to install it in a slot shorter than the PCI Express* connector.