Masalah Kritis
Saat mengkompirasi desain untuk perangkat Stratix V, sistem mungkin menampilkan banyak pesan peringatan terkait PLL yang mirip dengan Berikut:
Warning: PLL(s) placed in location FRACTIONALPLL_X0_Y1_N0
do not have a PLL clock to compensate specified - the Fitter will
attempt to compensate all PLL
Warning: PLL(s) placed in location FRACTIONALPLL_X0_Y1_N0
use multiple different clock network types - the PLL will compensate
for output clocks
Warning: PLL cross checking found inconsistent PLL clock
settings:
Warning: Node: mem_if|controller_phy_inst|memphy_top_inst|pll1~FRACTIONAL_PLL|mcntout was
found missing 1 generated clock that corresponds to a base clock with
a period of: 8.000
Warning: Clock: mem_if|ddr3_pll_write_clk was found on
node: mem_if|controller_phy_inst|memphy_top_inst|pll3|outclk with
settings that do not match the following PLL specifications:
Warning: -multiply_by (expected: 21, found: 4264000)
Warning: -divide_by (expected: 5, found: 1000000)
Warning: -phase (expected: 0.00, found: 90.00)
Pesan peringatan ini diharapkan dan dapat diabaikan.
Tidak ada solusi untuk masalah ini. Anda dapat mengabaikan dengan aman pesan galat.